Whipple Front Feed Flow Mod


Two seasons of testing this in the Coyote Modified Championship CobraJet the flow mod is now available for your front feed whipple coyote!

The intercooler flow mod was created to combat heat soaking issues with the 5.0 Coyote due to an under built A2W system when increasing boost and horsepower.

Customers can expect to see anywhere from a 20* to 50*+ drop in IAT2 under wide open throttle conditions.  The variance in temperature drops depends on each individual setup.  In most conditions with a complete system users can expect to plateau IAT2 in the 100* range on straight water, and 80’s on ice.

Kit includes:

  • Inlet ported/milled from .500″ to .870″
  • Outlet ported/milled from .500″ to .870″
  • New flow tubes increased to .870″ I.D. from .552″ I.D.
  • CNC Billet End Adapters
  • 1″ weld-on barbs for heat exchanger

Advantages to the flow mod over other options includes:

  • No need for icing in most cases
  • Air conditioning performance not sacrificed
  • Self recovers
  • Pulls more heat under WOT

For best performance the flow mod needs to be used in conjunction with a trunk mounted reservoir and aftermarket pump.

Kit includes the parts needed to upgrade your heat exchanger and we offer this labor service as well.

Customer supplied core is required for each purchase.

SKU: N/A Category:

Additional information

H/E Service

Yes, No


There are no reviews yet.

Be the first to review “Whipple Front Feed Flow Mod”

Your email address will not be published. Required fields are marked *